2018/Sep Braindump2go 210-065 Exam Dumps with PDF and VCE New Updated Today! Following are some new 210-065 Real Exam Questions:
1.|2018 Latest 210-065 Exam Dumps (PDF & VCE) 354Q&As Download:
https://www.braindump2go.com/210-065.html
2.|2018 Latest 210-065 Exam Questions & Answers Download:
https://drive.google.com/drive/folders/0B75b5xYLjSSNOG12eFhPdTJkRFU?usp=sharing
QUESTION 198
Which three Cisco TelePresence multipoint media conferencing platforms can utilize Cisco Unified Communications Manager for call control? (Choose three.)
A. Cisco TelePresence Multipoint Control Unit
B. Cisco TelePresence System 500-32
C. Cisco TelePresence Server
D. Cisco TelePresence Media Bridge Server
E. Cisco TelePresence Multipoint Switch
F. Cisco TelePresence SX20
Answer: ACE
QUESTION 199
Which two systems would be an appropriate solution for a traveling employee? (Choose two.)
A. Cisco Jabber
B. Cisco C-Series codec
C. Cisco TelePresence EX Series
D. Cisco Jabber Video for TelePresence
E. Cisco TelePresence System 500
F. Cisco IP Video Phone E20
Answer: AD
QUESTION 200
What are the best practices for maintaining a high-quality video call regarding latency, jitter, and packet loss?
A. 20-ms one-way delay, no jitter, no packet loss
B. less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss
C. 150- to 400-ms one-way delay, 50-ms jitter, 5 percent packet loss
D. 500-ms one-way delay, 50-ms jitter, 5 percent packet loss
Answer: B
QUESTION 201
Cisco TelePresence Video Communication Servers can be clustered to provide resiliency in the enterprise.
What is the maximum number of cluster members?
A. 2
B. 3
C. 6
D. 7
E. 15
Answer: C
QUESTION 202
Which component of the Cisco TelePresence multipoint media infrastructure is intended for use only with non-immersive endpoints?
A. Cisco TelePresence Server
B. Cisco TelePresence System 500-32
C. Cisco TelePresence Multipoint Switch
D. Cisco TelePresence Multipoint Control Unit
Answer: D
QUESTION 203
Which Cisco TelePresence endpoint uses only Cisco Unified Communications Manager as its call control device?
A. SX20
B. Cisco TelePresence System 500-32
C. EX90
D. C60
E. Video Communication Server
Answer: B
QUESTION 204
When manual discovery is used to register a Cisco TelePresence endpoint to a VCS via SIP, which two pieces of information are required to be configured on the endpoint for registration to occur, assuming that Cisco TMS and DNS are not being used? (Choose two.)
A. option 150
B. SIP URI
C. proxy address
D. H.323 alias
E. external manager address
F. RTP ports
Answer: BC
QUESTION 205
Which three of these are valid ways to initially configure a C-Series codec in a network where DHCP is not used? (Choose three.)
A. Tandberg Remote Control V
B. secure copy program
C. CLI using a console cable
D. touchscreen interface
E. secure web browser
F. Telnet
Answer: ACD
QUESTION 206
When dialing, in a format that is consistent for all users of a system, a user who has multiple TelePresence video devices associated, what are the three minimum requirements that must be configured for the user to be able to receive video calls? (Choose three.)
A. The Active Directory server must be installed.
B. Ensure that the Cisco TelePresence Video Communications Server has the FindMe option key installed.
C. Ensure that FindMe is set to on.
D. The NTP server must be set up.
E. The Cisco TelePresence Management Suite must be installed.
Answer: BCE
QUESTION 207
A user wants to use the One Button to Push feature on a Cisco TelePresence System 500-32 video endpoint.
Which configuration tool should be used to allow the One Button to Push feature to work?
A. Cisco Unified Communications Manager server, phones, devices, One Button to Push
B. Cisco Gigaswitch Router, Call Manager Express, One Button to Push
C. Cisco TelePresence Manager Suite server, new conference, set Conference type to One Button to Push
D. Active Directory server, users, new conference, One Button to Push
E. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push
Answer: C
QUESTION 208
Which configuration is needed in order for Cisco Jabber Video for TelePresence to initiate Multiway calls?
A. Configure the Multiway address under Video Settings in the Cisco Jabber Video for TelePresence client.
B. Configure the Mutliway URI address under TelePresence Management Suite > Systems > Provisioning > Users > Configuration Template.
C. Configure the Mutliway URI address under Cisco TelePresence Video Communications Server > Applications > Cisco Jabber Video for TelePresence.
D. The Cisco Jabber Video for TelePresence only supports Multisite calls, which is enabled by default.
Answer: B
!!!RECOMMEND!!!
1.|2018 Latest 210-065 Exam Dumps (PDF & VCE) 354Q&As Download:
https://www.braindump2go.com/210-065.html
2.|2018 Latest 210-065 Study Guide Video:
Braindump2go | Testking | Pass4sure | Actualtests | Others | |
$99.99 | $124.99 | $125.99 | $189 | $29.99/$49.99 | |
Up-to-Dated | ✔ | ✖ | ✖ | ✖ | ✖ |
Real Questions | ✔ | ✖ | ✖ | ✖ | ✖ |
Error Correction | ✔ | ✖ | ✖ | ✖ | ✖ |
Printable PDF | ✔ | ✖ | ✖ | ✖ | ✖ |
Premium VCE | ✔ | ✖ | ✖ | ✖ | ✖ |
VCE Simulator | ✔ | ✖ | ✖ | ✖ | ✖ |
One Time Purchase | ✔ | ✖ | ✖ | ✖ | ✖ |
Instant Download | ✔ | ✖ | ✖ | ✖ | ✖ |
Unlimited Install | ✔ | ✖ | ✖ | ✖ | ✖ |
100% Pass Guarantee | ✔ | ✖ | ✖ | ✖ | ✖ |
100% Money Back | ✔ | ✖ | ✖ | ✖ | ✖ |