[March-2018]Full Version 70-741 Dumps VCE and PDF 135Q for Free Download[93-103]

2018 March New Microsoft 70-741 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 70-741 Real Exam Questions:

1.|2018 Latest 70-741 Exam Dumps (PDF & VCE) 135Q&As Download:
https://www.braindump2go.com/70-741.html
2.|2018 Latest 70-741 Exam Questions & Answers Download:
https://drive.google.com/drive/folders/0B75b5xYLjSSNSUt4dmtFZ2pDQkk?usp=sharing

QUESTION 93
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
What should you do?

A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4 run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.

Answer: B
Explanation:
The correct answer to this question is B, configure name protection.
https://technet.microsoft.com/en-us/library/dd759188%28v=ws.11%29.aspx?f=255&MSPPError=-2147217396

QUESTION 94
Hotspot Question
You have a RADIUS server named RADIUS1. RADIUS1 is configured to use an IP address of 172.23.100.101.
You add a wireless access point (wap) named WAP-Secure to your network.
You configure WAP-Secure to use an IP address of 10.0.100.101.
You need to ensure that WAP-Secure can authenticate to RADIUS1 by using a shared secret key.
What command should you run? To answer, select the appropriate options in answer area.

Answer:

Explanation:
https://docs.microsoft.com/en-us/powershell/module/nps/new-npsradiusclient?view=winserver2012r2-ps

QUESTION 95
Hotspot Question
Your network is configured as shown in the network diagram.

Answer:

QUESTION 96
Hotspot Question
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://technet.microsoft.com/en-us/library/dn464289.aspx

QUESTION 97
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1.
You need to view the shares to which users will be redirected when the users attempt to connect to a folder named Folder1 in the DFS namespace.
What cmdlet should you run? To answer, select the appropriate options in the answer area.

Answer:

QUESTION 98
Hotspot Question
You have a DNS server named Server1.
The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)

The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)

The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)

Server1 does not contain any DNS zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation:
Recursion is disabled so internet hosts cannot be resolved. The recursive test fails because recursion is disabled. Server1 is not configured as a root server. The forwarders list would be greyed out if it was.

QUESTION 99
Hotspot Question
Your network contains an Active Directory forest named contoso.com.
The forest has three sites named Site1, Site2 and Site3.
Distributed File System (DFS) for the forest is configured as shown in the exhibit.

The forest contains a server named Server2 that hosts the DFS namespace.
\\Contoso.com\Namespace1\Folder2 has the following configuration.

\\Contoso\Namespace1\Folder2 has the targets configured as shown in the following table.

For each of the following statement, Select Yes if Statement is true. Otherwise , select No.

Answer:

QUESTION 100
Hotspot Question
You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server 1 has a virtual switch Switch1.
Server1 hosts the virtual machines configured as shown in the following table.

Windows firewall on VM1 and VM2 is configured to allow ICMP traffic.
VM1 and VM2 connect to Switch1.
You fail to ping VM1 from VM2.
You need to view the VirtualSubnetid to which VM1 connects.
Which cmdlet should you run on Server1.

Answer:

Explanation:
Get-VMNetworkAdapter-VMName VM1 | forest-list

QUESTION 101
Hotspot Question
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2.
Server2 has the following configured.
* Network address translation (NAT)
* The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
What subnet mask should you identify? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
The question specifies that the solution must minimize the number of available IP addresses so the correct answer is 255.255.255.224 which allows for 32 hosts.

QUESTION 102
Hotspot Question
You have a DirectAccess Server that is accessible by using the name directaccess.fabrikam.com
On the DirectAccess server, you install a new server certificate that has a subject name of directaccess.contoso.com, and then you configure DNS records for directaccess.contoso.com
You need to change the endpoint name for DirectAccess to directaccess.contoso.com
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

QUESTION 103
Hotspot Question
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 connects to your corporate network. The Corporate network uses the 10.10.0.0/16 address space.
Server1 hosts a virtual machine named VM1, VM1 is configured to have an IP addresses of 172.16.1.54/16.
You need to ensure that VM1 can access the resources on the corporate network.
What should you do? To answer, select the appropriate options in the answer area.

Answer:


!!!RECOMMEND!!!
1.|2018 Latest 70-741 Exam Dumps (PDF & VCE) 135Q&As Download:
https://www.braindump2go.com/70-741.html
2.|2018 Latest 70-741 Study Guide Video:
https://youtu.be/1cH2EISSbR4

Braindump2go Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99/$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back